Epson TM-U295 User Manual

EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
App.3App.4
2) Continuous printing
Each print solenoid can be used continuously up to 5400 dots. After energizing, however, the
print solenoid must not be used for more than twice the period of energizing time to prepare the
next printing.
Example 2: Continuous solid printing (when the bit image using continuous FFH is printed)
Number of dots in the horizontal direction/solenoid: 30
Number of dots/lines/solenoid: 30 ´ 8 = 240
Maximum number of lines for continuous solid printing = 5400/240 = approximately 22
Therefore, continuous solid printing of 22 lines is possible. In this case, the print solenoid must
not be used for [2 ´ 22 lines/2.1 = 21 second] before next printing.

Epson TM-U295 Specifications

General

Color	No
Maximum number of copies	2 copies
Maximum printing width (columns)	42
Dimensions (WxDxH)	180 x 190.5 x 101.5 mm
Power requirements	24 VDC±10%
Connectivity technology	Wired
Printing media thickness	0.09/0.35 µm
Mean time between failures (MTBF)	180000 h
Safety	UL, CSA C22.2 No. 950
Country of origin	Japan
Electromagnetic compatibility	VCCI class A, FCC class A, CE marking
Pallet width	1200 mm
Pallet height	1000 mm
Pallet length (UK)	1370 mm
Quantity per pallet	120 pc(s)
Quantity per pallet (UK)	160 pc(s)
Master (outer) case width	300 mm
Quantity per pallet layer	24 pc(s)
Master (outer) case height	405 mm
Master (outer) case length	485 mm
Harmonized System (HS) code	84433210
Quantity per pallet layer (UK)	32 pc(s)
Quantity per master (outer) case	4 pc(s)
Package depth	270 mm
Package width	235 mm
Package height	185 mm
Package weight	1845 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	191 mm
Width	180 mm
Height	102 mm
Weight	1600 g