Epson VT6L

Maintenance 8. Cable
VT Rev.1 163
(30
)
Tighten
the mounting screws of the
controller unit.
Hexagon socket head cap bolts: 3-M4×10
(with plain washer)
Tightening torque: 4.0 ± 0.2 N·m
(31
)
Install
the following covers the plate.
Arm #1 Cover Arm #2 Cover
Arm #3 Cover Arm #4 Cover 1
Arm #4 Cover 2 Connector Plate
Reference: Maintenance 7 Covers