Epson WF-C879R Series Setup And Administration Guide

❏ When you changed the administrator password using the printer
Check that you changed the set password by selecting Options > Password manager.
❏ Check that the Epson Print Admin Serverless license key was recognized in Epson Device Admin.
Check the license status by the following method.
1. Run Epson Device Admin, and then select a target printer on the device list.
2. Check the text displayed in License Type of Epson Print Admin Serverless on the detailed device
information pane.
If license key is not recognized despite that you set it, acquire device information by clicking All Devices or
Selected Devices on ribbon menu.
❏ If you print a job without storing it in the printer, a report for Usage Per Department is not created.
Cannot Set Pull Printing
Check the following items.
❏ e printer you want to register is connected to the network.
❏ e IP address or FQDN of the printer you want to register is correct.
❏ Epson Print Admin Serverless is available.
❏ e printer you want to register supports Pull Printing.
Setup & Administration Guide
Solving Problems
105

Epson WF-C879R Series Specifications

General

Print Technology	PrecisionCore Heat-Free Technology
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Monthly Duty Cycle	Up to 75, 000 pages
Technology	Inkjet
Functions	Print, Copy, Scan, Fax
Scan Resolution	Up to 1200 x 2400 dpi
Ink Colors	Cyan, Magenta, Yellow, Black
Print Resolution	4800 x 1200 dpi
Category	Printer
Mobile Printing	Apple AirPrint, Android Printing, Mopria
Display	4.3" color touchscreen
Paper Sizes	A4, A5, A6, B5, Legal, Letter
Ink Type	Pigment-based
Max Paper Size	13 x 19 inches (Super B)
Print Speed (Black)	25 ISO ppm