Epson WF-C879R Series - Prohibit Changing the Destination for Scan to Network Folder;Ftp (Configuration Template); Synchronizing with the LDAP Server (Configuration Template)

Prohibit Changing the Destination for Scan to Network Folder/FTP
(Conguration
Template)
e default destination for Scan to Network Folder/FTP can be set so that the user cannot change it.
1. Select Epson Open Platform Settings > Epson Print Admin Serverless Settings > Scan to Network
Folder/FTP from the conguration template.
2.
Enable Prohibit manual entry of destination.
Related Information
& “Prohibit Changing the Destination for Scan to Network Folder/FTP (Web
Cong
)” on page 56
Synchronizing with the LDAP Server (Conguration Template)
Set the LDAP server setting used by the authentication method for LDAP or Local DB and LDAP, and search the
attribute setting used to identify the user information.
It can be used as a redundant system of the LDAP server.
Note:
e
LDAP server settings that are set here are shared with the settings for Network > LDAP Server > Server Settings
(Primary Server) and Server Settings (Secondary Server) used by Contacts. When you change one value, it is reected in
the other.
Setup & Administration Guide
Information Registration and System Conguration
67