7. Press the OK button on the printer.
Setup is complete when the setup completion message is displayed.
Note:
If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a
connection report and check the solution.
Related Information
& “Checking the Network Connection Status” on page 34
& “When You Cannot Make Network Settings” on page 187
Checking the Network Connection Status
You can check the network connection status in the following way.
Network Icon
You can check the network connection status and strength of the radio wave using the network icon on the
printer's home screen.
Related Information
& “Guide to the Home Screen” on page 17
Printing a Network Connection Report
You can print a network connection report to check the status between the printer and the wireless router.
1. Load papers.
2. Select Settings on the home screen, and then press the OK button.
To select an item, use the
u
d
l
r
buttons, and then press the OK button.
3.
Select Network Settings > Connection Check.
e connection check starts.
4. Press the
x
button to print the network connection report.
If an error has occurred, check the network connection report, and then follow the printed solutions.
User's Guide
Network Settings
34
To Next Page
Loading...
Need help?
General