❏ On
Displays a warning and prints in single-sided mode when a 2-sided printing error occurs, or prints
only what the printer could process when a memory full error occurs.
❏ O
Displays an error message and cancels printing.
Ink Drying Time:
Select the ink drying time you want to use when performing 2-sided printing. e printer prints the
other side aer printing one side. If your printout is smeared, increase the time setting.
PC Connection via USB:
Select Enable to allow a computer to access the printer when connected by USB. When Disable is
selected, printing and scanning that is not sent over a network connection is restricted.
Related Information
& “Saving Power - Control Panel” on page 64
& “Entering Characters” on page 18
Menu Options for Network Settings
Select the menus on the control panel as described below.
Settings > Network Settings
Print Status Sheet:
Prints a network status sheet.
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from following and then
follow the instructions on the control panel.
❏ Wi-Fi (Recommended)
❏ Wi- Fi D i re c t
Connection Check:
Checks the status of the network connection and prints the network connection report. If there are any
problems with the connection, see the check report to solve the problem.
Related Information
& “Making Wi-Fi Settings by Entering the SSID and Password” on page 31
& “Making Wi-Fi Settings by Push Button Setup” on page 32
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 33
& “Wi-Fi Direct (Simple AP) Connection” on page 20
& “Printing a Network Status Sheet” on page 40
& “Checking the Network Connection Status” on page 34
User's Guide
Preparing the Printer
60
To Next Page
Loading...
Need help?
General