4. Place the originals face-up and short edge rst in the ADF, and then slide the ADF edge guide to the edge of
the originals.
c
Important:
❏ Do not load originals above the line indicated by the triangle symbol on the ADF.
❏ Do not add originals while scanning.
Placing Originals on the ADF for 2-up Copying
Place the originals in the direction shown in the illustration, and then select the orientation setting.
❏ Portrait originals: Select Portrait on the control panel as described below.
Multi-Page > 2-up > Original Orientation > Portrait
Place the originals on the ADF in the direction of the arrow.
❏ Landscape originals: Select Landscape on the control panel as described below.
Multi-Page > 2-up > Original Orientation > Landscape
Place the originals on the ADF in the direction of the arrow.
User's Guide
Preparing the Printer
52
To Next Page
Loading...
