c
Important:
❏ When storing or transporting the product, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product
from printing.
Note:
The illustrations in this section may vary depending on the product.
A
Remove all paper from the sheet feeder and make sure the product is off.
B
Open the scanner unit and make sure the print head is in the home position on the right.
Note:
If the ink cartridge holder is not in the home position on the right, turn on the product and wait until the ink cartridge
holder locks in the far right position. Then turn off the product.
User’s Guide
Maintaining Your Product and Software
104
To Next Page
Loading...
Need help?
General
