For XP-310 Series/XP-410 Series
Note for XP-410 Series:
If you want to scan your data to a memory card, insert a memory card first.
& “Inserting a Memory Card” on page 26
A
Place your original on the scanner glass.
& “Placing Originals” on page 28
B
Enter the Scan mode from the Home menu.
C
Select a scan menu item. Use l or r to select a menu, and press OK.
& “Scan Mode” on page 72
D
If you select Scan to PC, select your computer. If you select Scan to Memory Card, make scanning settings such
as saving format and scan area.
Note:
❏ If the product is connected to a network, you can select the computer to which you want to save the scanned
image.
❏ You can change the computer name displayed on the control panel using Epson Event Manager.
❏ For XP-410 Series: If you want to use the Scan to Cloud service, see the Epson Connect guide, which is available
on the Epson Connect portal site.
& “Using Epson Connect Service” on page 8
E
Press x to start scanning.
Your scanned image is saved.
For XP-210 Series
A
Place your original on the scanner glass.
& “Placing Originals” on page 28
B
Press the two start buttons simultaneously.
Your scanned image is saved in PDF format on your computer.
Scan mode menu list
Refer to the section below for the Scan mode menu list.
& “Scan Mode” on page 72
User’s Guide
Scanning
53
To Next Page
Loading...
Need help?
General
