EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
133 (200)
l. Click on the “Apply to selection” button at the bottom of the window to
change the profiles of all 64 ports. This may take up to 1 min.
m. Select the “Status/Maintenance” tab, ensure all ports are still selected ie
they are all red. Now click on “Enable all selected lines” button, after
about 1 min all ports should turn green.
n. Verify that on any four randomly selected ports, the “Line Oper Status”
field has changed to “Enabled”.
To Next Page
Loading...