Ericsson EDA 2530 - Page 48

EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
48 (200)
g. In the ‘Internet Protocol (TCP/IP) Properties’ window, left click in the
~ Use the following IP Address’ radio button.
h. In the ‘IP Address’ field, enter an IP Address for the laptop compatible with
the Out of Band IP Address of all the EDA 2530 shelves. For this project a
suitable laptop IP Address is 150.150.150.16.
Set the Laptop IP Address to 150.150.150.16
Note: The EDA 2530 IP Address is 150.150.150.4
i. In the ‘Subnet Mask’ field, enter the subnet mask for the EDA 2530 node.
This will always be the same for all EDA 2530 shelves.
Enter 255.255.255.0
j. Leave the ‘Default Gateway’ field blank.
k. Left click the OK button to save and close the ‘Internet Protocol (TCP/IP)
Properties’ window.
l. Left click the OK button to save and close the ‘LAN Properties’ window.
Click on Yes to reboot the laptop if prompted.
m. This step only applies to Ericsson personnel running Symantec antivirus
and anti spyware applications on Windows VISTA OS.