EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
49 (200)
Disable the antivirus and anti spyware protection by “Stop”ing the
Symantec Endpoint Client and Symantec Management Client, as described
in the follow steps:-
Select Start then right click on Computer, select the path: Manage >
Continue > Services and applications > Services
Right click on Symantec Management Client, and select Stop.
Right click on Symantec Endpoint Protection, and select Stop.
Now close all open windows.
n. Start the Command prompt click on Start > Programs > Accessories >
Command Prompt.
o. At a command prompt (MS-DOS prompt) type ipconfig then press Return.
The following will be displayed:-
IP Address 150.150.150.16
Subnet Mask 255.255.255.0
Default Gateway
Check the displayed values are correct. If correct proceed to the next
section. If incorrect repeat section 5.1.
p. Type exit then press RETURN to quit the Command Prompt menu.
To Next Page
Loading...