Ericsson EDA 2530 - Page 91

EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
91 (200)
e. Against the highlighted “ethG//1/1/3” entry in the table, under the
Command column right-click to select “addPort” from the drop-down list of
options.
f. Select “Apply All” to add the new entry.
g. Select “Read Network” to confirm the updated configuration, the following
screen shows the newly created VIDEO “ethG//1/1/3” entry.
7.7.5.3 Create “VOIP_GWx” S-VLANs
a. Against the VOIP_GW1 S-VLAN Name, double left-click on the
“ethG//1/1/2” entry under the “User Port Interface Name” column.
b. In the “VLAN Egress Ports…….” window select “Read NE”.
c. Highlight the “ethG//1/1/3” entry