READ THIS FIRST
0740 801 028
- 4 -
© ESAB AB 2017
READ THIS FIRST
Maintenance and repair work should be performed by an experienced person, and electrical
work only by a trained electrician. Use only recommended replacement parts.
This service manual is intended for use by technicians with electrical/electronic training for
help in connection with fault-tracing and repair.
Use the spare parts list as a guide to where the components are located in the equipment.
The spare parts list is published as a separate document, see "Spare Parts" section.
This manual contains details of design changes that have been made up to and including
July 2016.
The manual is valid for PEK with serial number 921-xxx-xxxx, 943-xxx-xxxx, 049-xxx-xxxx,
327-xxx-xxxx and 628-xxx-xxxx.
NOTE!
The unit is tested by ESAB in a general set-up. The responsibility for safety and
function, of the specific set-up, lies with the integrator.
CAUTION!
Read and understand the instruction manual before
installing or operating.
To Next Page
Loading...
