ESAB A2-A6 PEK - WIRING DIAGRAM; Component Descriptions

WIRING DIAGRAM
0740 801 028
- 7 -
© ESAB AB 2017
WIRING DIAGRAM
Component description
Component Description
1AP1 MMC module
1AP2 Display
1AP3 Buttons, rubber keypad
1L1, 26L1, X1L1 Ferrite ring cores
1L2 Ferrite ring core (from serial no. 628-xxx-xxxx)
26AP1 Motor control board
26AP2 Motor driver board
BR1 Rectifier bridge
C1 Filter capacitor
C2 Filter capacitor
S1 Emergency stop
X1 Terminal block
XP1 Connector
XS1/24AP1 CANbus connection
XS2 USB connector
XS3 Ethernet connector (from serial no. 628-xxx-xxxx)
200 Wire
14.2, 14.4, 14.5 Wire from CN14:1, CN14:4 and CN14:5
18.2 Wire from CN18:2
3.1, 3.3 Wire from CN3:1 and CN3:3
4.1, 4.3 Wire from CN4:1 and CN4:3
5.1, 5.5 Wire from CN5:1 and CN5:5
X1.4, X1.6, X2.1,
XB.2, X4.J, X4.A,
X6.B, X6.C, X9.F,
X1.G, XB.H
Wire from X1
CAUTION!
STATIC ELECTRICITY can damage circuit boards and
electronic components.
• Observe precautions for handling electrostatic
sensitive devices.
• Use proper static-proof bags and boxes.