EasyManua.ls Logo

ESPEC BTX-475 - Page 63

Default Icon
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bench Top User’s Manual
Appendix
Spc. No. ECSP07013 2/2
Chamber Spec. Form ISSUED BY ESPEC NORTH AMERICA, INC.
5/10/99 Rev. 1.01
EFD 0504A
3. Site requirements
3.1. Ambient Temperature Allowable range of operation: 5 to 35°C (41 to 95°F)
Range of assured performance: 18 to 27°C (65 to 80°F)
3.2. Power (Full Load Current)
Model
115 V 1 ph 60 Hz
3 wire grounding
BTL-433
16
3.3. Refrigeration Cooling
3.3.1 Air Cooled (Integral)
** Noise level measured 1 meter from front and at mid-point of door
3.4. Gravity Drain 1/2” Hose barb
3.5 Humidity Water
3.5.1. Connection 3/8” Hose barb
3.5.2. Flow
4
Peak 1 L/min (30-50 psig)
3.5.3. Water Quality 0.2 µS/cm to 10 µS/cm.
Maximum 2 mg/L free chlorine & filtered to 5 micron or less.
4
Initial fill of an empty steam generator. See detailed specification document for actual humidity usage rate.
Model Heat Rejection to Ambient Noise Level**
BTL-433 3300 BTU/Hr 65 dBA

Table of Contents

Related product manuals