Bench Top User’s Manual
Checks and Maintenance
7.3 Maintenance
7.3.1 Condenser Cleaning
(Not required on BT-1LN models)
Clean the condenser to remove dust.
Procedure:
1. Unplug the cabinet from its electrical outlet or turn off power supply to chamber.
2. Clean the condenser filter of dust with a vacuum cleaner or by rinsing.
7.3.2 Humidifier Cleaning
SHARP EDGES! Be careful of projections or sharp edges inside the
chamber.
For your safety, always wear gloves when working inside the chamber.
HOT ON THE INSIDE!
During and shortly after operation, the steam generator is HOT and
HUMID on the inside.
During operation, dirt and foreign matter stick to the steam generator and humidifying heater. To ensure
long lasting use, clean the generator and heater of dirt once a month. A good way to inhibit dirt from
accumulating is to drain the humidifying tray after every test.
To Next Page
Loading...
