Spc. No.
ECSP07011 4/4
7. Optional Equipment
x Communications hardware and software
o IEEE-488 (with 3
rd
party serial-to-GPIB converter)
o RS-485
o Ethernet (with 3
rd
party serial-to-ethernet converter)
x Access ports (available on the right or left side walls)
o 2” (50 mm) port
o 4” (100 mm) port
o Custom feed-through per customer requirements
x Safety related
o Emergency stop palm button to de-energize all hazardous voltages leaving the electrical box.
o Overcool protector to provide failsafe protection to products sensitive to cold temperature exposure.
x Shelves
o Shelves are designed for 11 lb. (5 kg) load and come with one set of rails.
x Sensors
o Solid state humidity sensor in lieu of wet bulb sensor. (humidity models only)
o Sensor output for external recorder. Included with all recorder options.
x Recorders (Cart mounted for sensors provided on the chamber)
o Circular chart recorders are available in 12” diameter and 1 to 4 input channels. (2 channel is standard)
o Strip chart recorders are available in 100mm paper and 1, 2, or 6 channels. (6 channel is standard)
o Data acquisition recorders are paperless units available in 1,2,3,6 or 12 channels. (3 and 6 are standard)
x Carts
o Chamber cart designed at 30” high with locations to install recorder, water treatment cartridge, water tank.
x Performance
o Liquid nitrogen injection system to boost cooling rate.
x Door with window
o 6 x 6” heated window
o Includes interior chamber light
x Dry air purge
o 2CFM; Limits frost or condensation on product during pull-down
x Ultra low humidity (humidity models only)
o Controlled low humidity
x Water Purification (humidity models only)
o DI cartridge filter system
o Spare DI cartridges
x Water supply tank (humidity models only)
To Next Page
Loading...
