28 CEM3 User Manual
Preset Menu
Presets are recorded by taking a snapshot of the current levels for all circuits assigned to the space
that
are set to be included in presets
(see
Allow in Preset
on
page 19
). If a circuit is not set to be included
in presets, any level it is currently using will be withheld from the record action.
To record or play back a preset:
1: Set the desired output levels for any dimmers in your rack using any method (methods include
[Test]>Set Local Levels and [Test]>Set System Levels on a CEM3 module, using a DMX source,
or using a sACN source).
2: Using the CEM3 face panel, navigate to [Test]>Presets. The Select Space screen will appear (if
multiple spaces exist).
3: Select the space for which you want to record the preset (if applicable) and then select OK. The
Preset screen will open.
4: Select the preset (1–64), and then choose the appropriate options:
• [Activate/Deactivate]: [Enter] toggles the preset between on and off.
• [Record]: [Enter] records the current levels for the space to the selected preset.
• Fade Time(s): Set the desired time (in seconds) for the preset to fade in when activated and
fade out when deactivated. Range is from 0–360 seconds. Default is 2 seconds.
5: After you have recorded the preset, release the output levels ([Test]>Release Set Levels) or turn
off the control source data.
To Next Page
Loading...
