ETC Sensor3 CEM3 - Test

CEM3 Menu Flow Chart 49
Test
Note:
Note:
Note:
About Dimmer 1
About Dimmer 1
About Dimmer 1
This screen is not shown
if lugs in the rack are
configured to one space.
About Dimmer 1
This screen is not shown
if lugs in the rack are
configured to one space.
About Dimmer 1
General Note: Rig Check
options are only available
in racks with AF enabled
and are not available in
non-AF and FDX racks.
About Dimmer 1
This screen is not shown
if lugs in the rack are
configured to one space.
About Dimmer 1
About Dimmer 1
About Dimmer 1
Space: [1]
Space1
[Canc el] [OK]
Select Space
Space: [All Spaces]
All Spaces
[Canc el] [OK]
Select Space
Set Circuits
Enter circuit numbers
to set levels
>
Rack #1 - CEM3 Rack
System OK
DMX A: Off DMX B: Off
sACN: 1/1
[Quick S etup] [Info]
Set Levels
Release Set Levels?
Yes
No
Release Set Levels
Set Levels in
Space 1
have been released
Rack #1 - CEM3 Rack
System OK
DMX A: Off DMX B: Off
sACN: 1/1
[Quick S etup] [Info]
Dimmer Check
Check by: [Lug]
Lug: [1]
Level (%): [100]
<<< Prev] [Next>>>
Release Set Levels
Set Levels in
All Spaces
have been released
Set Levels
Release Set Levels?
Yes
No
Dimmer Set/Override
[Set Local Levels]
[Set System Levels]
[Dimmer Check]
[Release Systm Lvls]
[Presets]
[Sequences]
[Release All Arch]
[Record Rig Check]
[Run Rig Check]
[Clear Rig Check]
Space: [1]
Space1
[Canc el] [OK]
Select Space
1: -- 2: --
3: -- 4: --
5: -- 6: --
7: -- 8: --
9: -- 10: --
11: -- 12: --
13: -- 14: --
Set Levels
Release Set Levels?
Yes
No
Release Set Levels
Set Levels in
Space 1
have been released
Set Levels
Release Set Levels?
Yes
No
Rack #1 - CEM3 Rack
System OK
DMX A: Off DMX B: Off
sACN: 1/1
[Quick S etup] [Info]
Dimmer Set/Override
[Set Local Levels]
[Set System Levels]
[Dimmer Check]
[Release Systm Lvls]
[Presets]
[Sequences]
[Release All Arch]
[Record Rig Check]
[Run Rig Check]
[Clear Rig Check]
Rack #1 - CEM3 Rack
System OK
DMX A: Off DMX B: Off
sACN: 1/1
[Quick S etup] [Info]
Dimmer Set/Override
[Set Local Levels]
[Set System Levels]
[Dimmer Check]
[Release Systm Lvls]
[Presets]
[Sequences]
[Release All Arch]
[Record Rig Check]
[Run Rig Check]
[Clear Rig Check]
Rack #1 - CEM3 Rack
System OK
DMX A: Off DMX B: Off
sACN: 1/1
[Quick S etup] [Info]
Dimmer Set/Override
[Set Local Levels]
[Set System Levels]
[Dimmer Check]
[Release Systm Lvls]
[Presets]
[Sequences]
[Release All Arch]
[Record Rig Check]
[Run Rig Check]
[Clear Rig Check]
Rack #1 - CEM3 Rack
System OK
DMX A: Off DMX B: Off
sACN: 1/1
[Quick S etup] [Info]
Dimmer Check
Check by: [Circuit]
Ckt: [1]
Level (%): [100]
Space: [1]
<<< Prev] [Next>>>