Operation & Software Manual
236
Direct Drives & Systems
Chapter E: Appendixes ETEL Doc. - Operation & Software Manual # DSC2P 903 / Ver. F / 3/6/05
15.5 CLX example
:10.0 ;Label 10
X1.0=1 ;Sets user’s variable X1 of axis 0 to 1
X2.0=2 ;Sets user’s variable X2 of axis 0 to 2
X3.0=3 ;Sets user’s variable X3 of axis 0 to 3
WTT.0=1.0 ;Waits for 1 (ISO unit)
CLX.0 ;Clears all user’s variables X (resets to 0) as well as the accumulator
WTT.0=2.0 ;Waits for 2 (ISO unit)
JMP.0=10 ;Jumps to label 10
To Next Page
Loading...
