ETEL Doc. - Operation & Software Manual # DSC2P 903 / Ver. F / 3/6/05 Chapter B: System setup & tuning
Operation & Software Manual
Direct Drives & Systems 65
• The previous window disappears and a new Download Sequence window appears.
• Select an axis and click on the D
ownload button. Wait until the sequence is completely downloaded. (The
Axis * is the DSMAX).
Remark: If a sequence is already running in the controller, the Error window below appears:
8.5.3.2 Download registers
For registers, follow the same procedure as for a sequence (refer to §8.5.3.1
).
Remark: The window's name will be Download Registers. The Error window will never appear.
To Next Page
Loading...
