Ethos X18 Series User Manual

X20/X20S and Ethos v1.5.0 User Manual
In logic switches the sources may have this option set to ignore sources coming from
the trainer input. A typical application is where a logic switch is configured to detect
movement of the master trainer’s sticks (e.g. Elevator stick) to allow for instant
intervention if things go wrong. This option is needed to prevent the student stick
inputs from triggering the logic switch.
Sensor Options
On a telemetry source the options dialog allows the sensor to be inverted, or its
maximum or minimum value to be used. Some sensors have additional options specific to
that sensor.
12 rev 4

Ethos X18 Series Specifications

General

Brand	Ethos
Model	X18 Series
Category	Controller
Language	English