Ethos X18 Series User Manual

X20/X20S and Ethos v1.5.0 User Manual
Date and Time
The Date and Time settings are:
24 hour time
The clock displays in 24 hour format when enabled.
Display seconds
The clock will display seconds when enabled.
Date
Should be set to the current date. This is used in the logs.
Time
Should be set to the current time. This is used in the logs.
Time zone
Allows configuration of the user's time zone.
Adjust RTC speed
The Real Time Clock may be calibrated to compensate for any drift in the clock, up to 41
seconds per day.
For the calibration, work out how many seconds your clock gains or loses in 24 hours.
25 rev 4

Ethos X18 Series Specifications

General

Number of Channels	18
Touch Screen	Yes
Telemetry	Yes
Internal RF Module	Yes
Haptic Feedback	Yes
Voice Prompts	Yes
Operating Voltage Range	8.4V
Gimbal Type	Hall Effect
Connectivity	Bluetooth
Ports	USB-C
Battery	2S Li-battery