X20/X20S and Ethos v1.5.0 User Manual
We will name the model ‘Weasel', select a bitmap image for it, and follow the wizard to the
end which results in the 'Weasel' model being created in the Airplane group. It will also be
made the active model, so we can continue to configure its features.
Step 4. Review and configure the mixes
Tap on the Mixes icon to review the mixes created by the Airplane wizard.
The wizard has created an Ailerons mix on channels 1 and 2, followed by an Elevators mix
also on channels 1 and 2. This means both input controls will act on the two elevon
channels.
Ailerons
To review the Aileron mix, tap on the Ailerons line and select Edit from the popup menu.
To Next Page
Loading...
Need help?
General