Ethos X18 Series User Manual

X20/X20S and Ethos v1.5.0 User Manual
Trainer Mode = Slave
Link Mode
The trainer link can be either via trainer cable, Bluetooth, or SBUS or CPPM external
module. The trainer cable should be a 3.5mm mono audio lead.
Bluetooth
Mode
Allows selection between normal speed and high speed for the Bluetooth link. For
lower latency the high speed setting should be used if both radios support it.
Local Name
This is the local BT name that will be displayed in devices being connected. The
default name is FrSkyBT, but may be edited here.
275 rev 4

Ethos X18 Series Specifications

General

Brand	Ethos
Model	X18 Series
Category	Controller
Language	English