Ethos X18 Series User Manual

X20/X20S and Ethos v1.5.0 User Manual
Switches settings
Switch middle detect delay
This setting ensures that the switch middle position on three way switches is not
detected when the switch is flipped from the up to the down position in one movement,
and vice versa. It should only be detected when the switch stops in the middle position.
The default has been changed to 0ms to suit the FrSky stabilized receivers when
detecting 'Self check' on CH12.
Switches SA to SJ may be defined as:
 None
 Momentary
 2 POS
 3 POS
44 rev 4

Ethos X18 Series Specifications

General

Brand	Ethos
Model	X18 Series
Category	Controller
Language	English