Ethos X18 Series User Manual

X20/X20S and Ethos v1.5.0 User Manual
Set the calibration value to 12 times this number of seconds, making it negative if your
clock runs fast, and positive if it is slow. For best accuracy, you may then want to check if
your clock is accurate, and adjust the calibration value slightly. The actual calibration value
may be set to -500 to +500.
Auto adjust from GPS
When enabled, the time and date will be automatically set from remote GPS sensor data.
26 rev 4

Ethos X18 Series Specifications

General

Number of Channels	18
Touch Screen	Yes
Telemetry	Yes
Internal RF Module	Yes
Haptic Feedback	Yes
Voice Prompts	Yes
Operating Voltage Range	8.4V
Gimbal Type	Hall Effect
Connectivity	Bluetooth
Ports	USB-C
Battery	2S Li-battery