ETOP PISA-E11 - Page 80

72 PISA-E11 User`s Manual
IRQ Resource
When resources are controlled manually, assign each system
interrupt a type, depending on the type of device using the interrupt.
This item allows you to determine the IRQ assigned to the ISA bus
and is not available to any PCI slot.
Phoenix-Award BIOS CMOS Setup Utility
IRQ Resource
IRQ-3 assigned to
[PCI Device]
IRQ-4 assigned to
[PCI Device]
IRQ-5 assigned to
[PCI Device]
IRQ-7 assigned to
[PCI Device]
IRQ-9 assigned to
[PCI Device]
IRQ-10 assigned to
[PCI Device]
IRQ-11 assigned to
[PCI Device]
IRQ-12 assigned to
[PCI Device]
IRQ-14 assigned to
[PCI Device]
IRQ-15 assigned to
[PCI Device]
Item Help
Menu Level ►
Legacy ISA for
devices compliant
with the original PC
AT bus specification,
PCI/ISA PnP for
devices compliant
with the Plug and
Play standard
whether designed for
PCI or ISA bus
architecture
↑↓← → ：Move Enter: Select +/-/PU/PD: Value F10:Save Esc: Exit F1:General Help
F5:Previous Value F6:Fail-Safe Defaults F7:Optimized Default
IRQ-3,4,5,7,9,10,11,12,14,15 assigned to
The choice: PCI Device, Reserved.
IRQ-3 assigned to
PCI Device ….. [ s ]
Reserved ….. [ ]
: Move Enter: Accept ESC:Abort