IT IS VERY IMPORTANT THAT ALL THE STAFF WORKING WITH THE EQUIPMENT HAVE
READ AND FULLY UNDERSTOOD THE INSTRUCTIONS AND
INFORMATION PROVIDED IN THIS MANUAL AND FOLLOW AND APPLY THEM BEFORE
USING IT. THE MANUFACTURER IS NOT
LIABLE FOR ANY CONSEQUENCES RESULTING FROM MISUSE BY THE OPERATOR.
PLEASE READ AND KEEP THESE INSTRUCTIONS IN A SAFE PLACE
This manual can be downloaded from the internet www.euromag.com visiting the download area.
To ensure a proper and safe installation we strongly recommend thoroughly reading this operation manual.
IMPORTANT WARNING
The operator shall bear responsibility for the suitability of the device for the specific purpose:
Improper installation and operation of the devices (systems) will cause warranty to be void
• The manufacturer will not be liable for any kind of damage resulting from the use of its products,
including, but not limited to those deemed direct, indirect, incidental, punitive and consequential. The
installation, connection, commissioning and maintenance must be performed by staff specifically
qualified and authorized for that purpose.
• The installation personnel must ensure that the measuring system is correctly connected in accordance
with the wiring diagram.
For applications that require high working pressures or substances that may be hazardous to the
people, the environment, equipment or anything else if a pipe breakage occurs, Euromag International
recommends, that before installing the sensor the operator takes the appropriate precautions such as
precautions such as the correct location, protection or the mounting of a guard or safety valve.
The device contains live electrical components, thus the installation, monitoring and maintenance must
be carried out by qualified and experienced staff fully aware of all the necessary precautions. Before opening
any inner part, please disconnect the power supply.
The flow meter consists of metal and plastic parts, all of which must be in compliance with local rules and
requirements concerning waste disposal.
To Next Page
Loading...
Need help?
General
