Euromag MC608 Series Installation Manual

-4,00
-3,50
-3,00
-2,50
-2,00
-1,50
-1,00
-0,50
0,00
0,50
1,00
1,50
2,00
2,50
3,00
3,50
4,00
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 7,0 7,5 8,0 8,5 9,0 9,5 10,0
Error [%]
Velocità [m/s]
CLASS 2 2
61
12. RETURNING A FLOWMETER FOR CHECK UP
AND REPAIR
The device was carefully manufactured and has passed rigorous testing before leaving the factory. If
correctly installed and maintained, the event of a malfunction should be highly unlikely.
Should you nevertheless need to return a device for inspection or repair, please pay strict
Attention to the following points:
- A result of the provisions of law on the environmental protection and the safeguarding of health and safety
of our staff, the manufacturer may only handle, check and repair those devices returned without having
being in contact with free-risks products for both the staff and the environment.
- This means that the manufacturer can carry out the service on the device only if the latter is accompanied
by the following certificate
(See next section) attesting that the device itself can be handled safely.
12. RETURNING A FLOWMETER FOR CHECK UP AND REPAIR
Graph 3

Euromag MC608 Series Specifications

General

Brand	Euromag
Model	MC608 Series
Category	Media Converter
Language	English