55
10.6 MEMORY
Load user copy
Save user copy
Factory settings
Datalogger
• Show last row
• Full erase
• LOG interval
Password setting
10.6.1 LOAD USER COPY
Allows to load customized settings.
10.6.2 SAVE USER COPY
Allows to save customized settings.
10.6.3 LOAD FACTORY SETTINGS
Allows to load factory settings.
10.6.4 DATALOGGER
• Show last row
Shows last informations logged. Date, time,
counter, instant flow rate, temperature, battery
condition Others information stored (e.g.
temperature, pressure process) are displayable
only by downloading the data.
• Full erase
Erase memory of the converter.
• LOG interval
Select logging range.
1 minute minimum / maximum 120 minutes
WITH BATTERY POWERED MC608B AND
MC608R PRIORITY IS GIVEN BY THE RANGE OF
MEASUREMENT.
(ACQUISITION> = MEASUREMENT)
To read and change the memory data from the
MC608 software program, move to the DATA LOG
screen - see the picture below.
Select START and END row to read, the “get last
log” button will reach the last available log.
Press the READ Log button to download the data.
Press “SAVE CSV” to save data on your PC in CSV
format.
Press “Reset datalog” to completely reset the
memory of the converter.
10. MENU DESCRIPTION
To Next Page
Loading...
Need help?
General
