63
The display is off and
does not turn on.
There is no voltage supply, or the voltage supply is incorrect. Check the
power supply voltage on the name plate of the converter. In case of MC608B
check the battery life and replace the battery pack.
Liquid is flowing and
the pipe is filled, but NO
reading is available
Reduce the flow cut off filter (factory settings is 2% of the full scale)
NOTE: Should you need to reduce the flow cut off
filter, it means the speed of the liquid is lower than that
recommended for a accurate measurement. It is advisable
to lower the full scale (120% of the maximum of the
process).
13. APPENDIX - TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
