Euronda Pro System E8 - Page 28

E8_Aus_rev07 – 2021-02-02
27
Fig. 6.8-3
Fig. 6.8-4
Fig. 6.8-5
Maximum load
Never exceed the max. load specified in Appendix 5 “Description of Programs”.
- Always observe the maximum load, established and checked by Euronda S.p.A., for each solid material
to sterilize.
- The maximum sterilisable load of the unit is indicated in Annex 5.
- The unit is tested and only provides the indicated performance levels if the internal load does not exceed
the above values for the maximum load.
NO
Ok!