E8_Aus_rev07 – 2021-02-02
7.7.8 Release of the load through the identification of the user
Once the list of users has been entered, if the load release function is activated using the settings menu,
also load release through the user identification function is activated. While this function is active, when the
door is opened at the end of the cycle, if the load is sterile the autoclave asks users to identify themselves by
selecting their names in the user list. The user can then decide if to release the load, reject it, or accept it for
immediate use. Once accepted, if the unit is connected to a label printer, at the end of the operation the
labels will be printed. The unit will also record the decision.
To Next Page
Loading...
