E8_Aus_rev07 – 2021-02-02
b) Test reminder
It gives the possibility of setting test execution intervals (Bowie & Dick, Helix, Vacuum).
After the expiry of the set interval, when the autoclave is switched on, the user is reminded to execute the
required test.
To activate this function proceed as indicated in the figure
After configuring the required memorandums and frequency, press the right button to save, the middle button
to return and make changes, or the left button to exit without saving the changes
7.9 LONG PERIODS OF INACTIVITY
1. Disconnect the unit from the mains supply.
2. Empty the tanks (chap. 6.7 "Tanks: Instructions for filling and draining").
3. Leave the door ajar.
4. Cover the unit with the polyethylene hood supplied with the unit, to protect it from humidity and dust.
To Next Page
Loading...
