eversense E3 - Page 26

24
Eversense E3 CGM User Guide
3
3. Line up the four gold pins on the bottom of the
smart transmitter with the four gold pins on the
charging cradle.
• Slide the smart transmitter into place in the
charging cradle.
• Once positioned, push down on the smart
transmitter until it snaps into place.
4. Plug the adapter into an AC power outlet.
• Once fully charged, a small green LED light
appears on the top front of the smart transmitter
(above the power button).
• Disconnect the power supply from the smart
transmitter after it is fully charged.
• To release the smart transmitter from the charging
cradle, pull back on the tab and lift the smart
transmitter out of the cradle.
LED Indicator
(lights up green
or orange)
3