eversense E3 - Re-linking a Sensor

90
Eversense E3 CGM User Guide
8
Re-linking a Sensor
1. Confirm with Customer
Support that you should
re-link your sensor.
2. Tap Linked Sensor.
IMPORTANT: Do not re-link your sensor unless instructed by customer support. Re-linking the sensor
returns the system to Initialisation Phase, requiring 4 blood glucose fingerstick calibrations within 36 hours.
5. Tap Cancel or Re-link.
3. Tap Re-link detected
sensor.
4. Tap Cancel or OK to
continue.