43
Eversense E3 CGM User Guide
5
4. Check the connection between the smart
transmitter and the sensor.
• Tap Menu > Placement Guide.
• Refer to the Placement Guide when
attaching your smart transmitter to ensure
there is some connection between the sensor
"and smart transmitter.
3. Remove the larger clear backing and position the
smart transmitter directly over the sensor.
• For the optimal signal strength, the smart
transmitter must be placed directly over the
sensor. Signal strength can also be improved by
rotating the smart transmitter over the sensor
such that the sensor is centred vertically under
the smart transmitter.
You may wear the smart transmitter over the
Tegaderm with the Eversense adhesive patch
after the 24-hour Warm-Up Phase is complete.
Note: To see more information about signal
strength and transmitter positioning, see
Placement Guide – Show More Detail Screen
in the Linking the Sensor section.
To Next Page
Loading...
