52
Eversense E3 CGM User Guide
6
Warning: Certain conditions and alerts will prevent glucose data from being displayed. During these times,
you should use a home blood glucose monitor to make treatment decisions. You should carefully read the
Alerts and Notifications section of this User Guide to understand these conditions.
Note: If a calibration entry is very dierent from the system's sensor glucose value, you will be prompted with a
Calibrate Now Notification about an hour later. A Calibrate Now Alert will display 11 to 12 hours later, regardless of
which Daily Calibration phase the system is in. In this situation, if you do not calibrate within 16 hours, no glucose
values will be displayed. After 24 hours with no calibration, the system returns to Initialisation Phase.
6
To Next Page
Loading...
