evertz 5601AC02 - Network Configuration; SNMP Configuration

Model 5601ACO2 Automatic Changeover Unit
TECHNICAL DESCRIPTION Revision 1.2 Page 4-9
4.6.1. Network Configuration
1) Network Configuration - set the IP parameters for this 5601ACO2
ip address: 192.168.1.200
netmask address: 255.255.255.0
gateway: 0.0.0.0
broadcast address: 192.168.1.255
DHCP enabled: False
----------------------------------
(1) Set IP Address
(2) Set Netmask
(3) Set Gateway
(4) Set Broadcast Address
(5) Use DHCP
(6) Enable Ethernet
(S) Save and exit
(X) Exit without saving
4.6.2. SNMP Configuration
2) SNMP Configuration – set the TRAP destination IP address which originate at this 5601ACO2 (if
enabled)
---------------------------------------------------
Trap Destination 1: 192.168.1.88
---------------------------------------------------
(1) Set Trap IP Address
(2) Remove Trap IP Address
(S) Save and exit
(X) Exit without saving