Excell EX-2001 Racer Plus - 5-3 Password Setting

EX-2001 Plus v1.3 SME300000060
16
EXCELL PRECISION CO., LTD.
Recall Linearity correction point
Set the calibration switch to ON position.
Press
CAL
key
Choose
Press key
Press
key
Press key
After finishing the first linearity calibration,
choose to continue or exit the linearity mode
by pressing .
Five point linearity calibration.
Choosing from 1P ~ 5P by
pressing key.
⇒ No linearity
calibration value at this point
⇒ Linearity
calibration value at this point
The weight value is displayed.
⇒ Increase the number of
the flashing digit
⇒ Decrease the number
of the flashing digit
⇒ Shift the flashing digit
one space to left
⇒ Shift the flashing digit
one space to right
⇒ Save the settings
⇒ Exit the settings