Excell EX-2001 Racer Plus - 5-4 Error Messages

EX-2001 Plus v1.3 SME300000060
17
EXCELL PRECISION CO., LTD.
CAL
Clear a linearity correction point
Set the calibration switch to ON position.
Press key
Choose
Press key
Press key
Press key
After finishing the first linearity calibration,
users can choose to continue or exit the
linearity mode by pressing .
Five point linearity calibration.
Choosing from 1P ~ 5P by
pressing key.
⇒ No linearity
calibration value at this point
⇒ Linearity calibration
value at this point
The weight value is displayed.
⇒ Increase the number of
the flashing digit
⇒ Decrease the number
of the flashing digit
⇒ Shift the flashing digit
one space to left
⇒ Shift the flashing digit
one space to right
⇒ Save the settings
⇒ Exit the settings