Test Setup - Test Configurator, Timer, and System
104 FTB-700G/800 Series
Modify Structure Button
Primary Port / Secondary Port, available with Through Mode test
application, allows to select the NetBlazer’s ports that are respectively
used as primary (Port 1) and secondary (Port 2) port. The configuration
of the network configuration parameters will be available on the
Primary Port only.
Connector allows the selection of the NetBlazer’s port.
Interface/Rate Connector
10GE WAN
10GE LAN
Port 1 - SFP+
1GE Optical
100M Optical
Port 1 - SFP
Port 2 - SFP
10/100/1000M Electrical Port 1 - RJ45
Port 2 - RJ45
To Next Page
Loading...
