Test Results
NetBlazer 397
Summary (1588 PTP)
Summary (1588 PTP)
From the Test menu, tap Results, and the Summary tab.
Test Status displays the current status of the 1588 PTP test. The global
test pass/fail verdict is displayed next to the Test Status field when
enabled (see Pass/Fail Verdict on page 116).
Start Time indicates the date and time the test has been started. The
date and time is reset every time the test is restarted or reset.
Power Recovery when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Power Recovery field. Refer
to Power Failure Recovery on page 559.
Logger Full, when displayed, indicates that the logger is full. Refer to
Logger and Alarms/Errors Logger on page 362.
Test Status Description
-- Idle state, the test is not running or results are not available.
In Progress The test is running.
Completed The test is completed, stopped at the planned time, or manually
stopped when there is no set timer.
Aborted The test is interrupted; stopped before the set timer.
[Message type] Request Denied, Session Canceled, or No Reply is
displayed next to Aborted when applicable.
To Next Page
Loading...
