Test Results
NetBlazer 441
Summary (Traffic Gen & Mon)
Summary (Traffic Gen & Mon)
From the Test menu, tap Results, and the Summary tab.
Test Status indicates the actual test status as follows. The global test
pass/fail verdict is displayed next to the Test Status when enabled (see
QoS Metrics on page 272).
“--”: The test is not running or results are not available.
In Progress: The test is running.
Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.
Start Time indicates the date and time the test has been started. The
date and time is reset every time the test is restarted or reset.
Power Recovery when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Power Recovery field. Refer
to Power Failure Recovery on page 559.
Logger Full, when displayed, indicates that the logger is full. Refer to
Logger and Alarms/Errors Logger on page 362.
Stream
The following statistics are available for each stream.
Current Throughput: See Streams - Throughput on page 390.
Frame Loss Rate: See Streams - Frame Loss / Out-of-Sequence on
page 388.
Jitter: See Streams - Jitter on page 388.
Latency: See Streams - Latency on page 389.
To Next Page
Loading...
