Test Setup - Test Configurator, Timer, and System
NetBlazer 137
EtherSAM - Global
EtherSAM - Global
From the Test menu, tap Setup, Test Configurator, tap on the test block,
and on the Global tab.
Dual Test Set
Dual Test Set (DTS) check box when selected (cleared by default)
enables EtherSAM Dual Test Set. Once Dual Test Set is enabled, use
the Discover Remote button to select a remote unit.
Note: Alternatively it is possible to use the Discover Remote button to connect to a
remote module and automatically enable the Dual Test Set. For more
details, refer to Discover Remote Button on page 530.
Disconnected indicates that there is no connection established with a
remote module.
Connected indicates that the connection is established with a remote
module.
Discover Remote button allows to discover remote modules
supporting Remote Loopback and/or Dual Test Set. For more details,
see Discover Remote Button on page 530.
To Next Page
Loading...
