Test Results
438 FTB-700G/800 Series
Summary (TCP Throughput)
Summary (TCP Throughput)
From the Test menu, tap Results, and the Summary tab.
Test Status indicates the actual test status as follows.
Start Time indicates the date and time the test has been started. The
date and time is reset every time the test is restarted or reset.
Power Recovery when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Power Recovery field. Refer
to Power Failure Recovery on page 559.
Logger Full, when displayed, indicates that the logger is full. Refer to
Logger and Alarms/Errors Logger on page 362.
Test Status Description
“--” The test is not running or results are not available.
In Progress The test is running.
Completed The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.
Aborted - <Reason> The test is interrupted; stopped before the set timer. Possible
<Reason> are: TCP Session Closed or Remote IP Not Found.
To Next Page
Loading...
