NetBlazer 563
13 Suspend and Resume
Suspend and Resume allow respectively the FTB-1 and its running
applications to stop (Suspend) and to be quickly re-initialized (Resume)
when the unit is turned back on.
Suspend Mode
To enter the suspend mode, refer to the FTB-1 user guide. In Suspend
Mode, the NetBlazer module is directly turned off and its configuration and
injection information are kept. The Suspend Mode remains active as long
as battery power or AC power is available. If the battery is drained the
information is lost and the Resume operation is no more possible.
The following conditions prevent the activation of the Suspend Mode:
A firmware download is in-progress
Resume operation is in-progress.
Note: The test will be stopped when entering the suspend mode meaning that the
test logger content will be lost.
To Next Page
Loading...
