EasyManua.ls Logo

EXFO FTB-880 - Page 339

EXFO FTB-880
675 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Test Results
NetBlazer 327
Alarms/Errors
Unexp MEP (Unexpected MEP)
RX: A CCM frame was received from the peer MEP with same MEG/MD
Level, correct MEG ID/MAID, and correct source MAC Address
(corresponds to the peer MEP) but with unexpected MEP ID. The alarm
is cleared when no CCM frames with same MEG/MD Level, correct
MEG ID/MAID, correct source MAC Address (corresponds to the peer
MEP) but with an unexpected MEP ID are received within an interval
equal to 3.5 times the configured CCM transmission period.
Unexp Period (Unexpected Period)
RX: A CCM frame is received from the peer MEP with same MEG/MD
Level, correct MEG ID/MAID, and correct MEP ID but with a period field
value different than the one configured. The alarm is cleared when no
CCM frames with same MEG/MD Level, correct MEG ID/MAID, and
correct MEP ID but with incorrect period field value are received within
an interval equal to 3.5 times the configured CCM transmission period.
RDI (Remote Defect Indication)
RX: The RDI flag bit of a valid CCM frames is set to 1. A valid CCM frame
has its source MAC address matching the Peer MEP MAC address, the
destination MAC address matching either the unit port Unicast MAC
address or a Multicast class 1 address (refer to page 638), and VLANs
matching the unit port VLANs.
TX: The RDI flag bit of transmitted CCM frames is set to 1.

Table of Contents

Related product manuals